Tapered
Metric Taper Grooved Pins are solid pins that the diameter increases uniformly along the length of the pin have 3 grooves down the side of them.
Metric taper pins have a 1:50 taper which means that for every 50mm in length the diameter increases by 1mm. The nominal size is the diameter of the small end on the pin.
The diameter of a Metric Groove Pin is intended to be larger than the hole in which it is inserted. Groove pins are a type of interference fit fastener and need to be pressed into place.
Metric & Multistandard Components Corp. can supply Din 1471 Grooved Taper Pins in unhardened carbon steel and stainless steel.
Metric taper pins have a 1:50 taper which means that for every 50mm in length the diameter increases by 1mm. The nominal size is the diameter of the small end on the pin.
The diameter of a Metric Groove Pin is intended to be larger than the hole in which it is inserted. Groove pins are a type of interference fit fastener and need to be pressed into place.
Metric & Multistandard Components Corp. can supply Din 1471 Grooved Taper Pins in unhardened carbon steel and stainless steel.
For technical and dimensional information, please click catalog icon in the header.