Metric will be closing Friday May 27th at 2:30 pm and will be closed Monday May 30th.

 

Double End Stud 835


Double End Studs are threaded fasteners that have a thread on both ends with an unthreaded portion in between the two threaded ends. Double ends studs are designed to be used where one of the threaded ends is installed in a tapped hole and a hex nut used on the other end to clamp a fixture onto the surface that the stud has been threaded into.

Another name that is also sometimes used for Double End Studs is Tap End Stud. A Tap End Stud will have different thread lengths on both ends. It has one short thread that is intended to be used in a tapped hole. For Metric Double Ends Studs the thread of the tap end is not included in the nominal length of the stud. DIN 835 Double End Studs have a tap end that is equal to twice the diameter of the stud. For example: DIN 835 M10 X 40 has an overall length of 60mm.

Metric & Multistandard Components Corp. offers Double End Studs in DIN 835 in Property Class 5.8. Double Ends Studs in other material or special thread lengths may be available upon request.

Double End Stud 835